Home » Backyard Outbuildings » 5’x7′ Rooftop Storage Shed in Downtown Vancouver
Outbuildings.ca-Rooftop-Storage-Shed

5’x7′ Rooftop Storage Shed in Downtown Vancouver

About this shed

This rooftop storage shed sits on a 43rd-floor penthouse patio in downtown Vancouver, more than 500 feet above the street. It’s 5′ x 7′ (35 sq/ft), with corrugated steel and open-joint panel siding and a steel door. Getting it there was the hard part: there was no elevator to the top floor, the wind is strong that high up, and the spot on the patio was too tight to build in place.

Designed to fit the service elevator

The shed was designed in parts small enough to fit inside the building’s service elevator. The elevator didn’t reach the penthouse, so the parts were carried up the stairs for the last two floors.

Built on the patio, then moved into place

The floor and walls were framed on an open part of the patio, then the finished shed was moved into its tight final spot. Corrugated steel went on the back and sides, and open-joint panels went on the front around the steel door.

Anchored against the wind

Wind loads are strong at this height, so the shed is fastened to the building to stop it from lifting. Small 3-inch overhangs keep the roof edges tight for the same reason.

SPECIFICATIONS:
LocationDowntown Vancouver, BC (43rd-floor penthouse patio)
Size5′ x 7′ (35 sq/ft)
DesignClassic
SidingOpen-joint panels and corrugated steel
Overhangs3″ all around
CeilingSanded plywood
Door32″ steel door
WindowsNone
Power and heatNone
AnchoringFixed to the building to resist wind uplift

More photos

The photos below show the finished shed, the details and the view from the patio.

What to plan before building a rooftop storage shed

A shed on a high-rise patio needs more planning than one in a backyard.

  • Access: measure the service elevator and the stairs, then design the parts to fit.
  • Wind: plan how the shed will be fixed to the building so it can’t lift in a storm.
  • Weight and roof: check what the patio and its waterproofing can carry before anything is fastened down.
  • Approvals: the building’s strata and the City may both need to agree before the shed goes up.
  • Size: keep it small. Vancouver doesn’t require a building permit for a shed under 10 m² (108 sq/ft) that doesn’t create a hazard, but zoning rules still apply.

Frequently asked questions

How big is this rooftop shed?

It’s 5 feet by 7 feet, which is 35 sq/ft (about 3.3 m²) of floor space.

How did the shed get to the 43rd floor?

The parts were sized to fit the service elevator. The elevator didn’t go all the way up, so the parts were carried up the stairs for the last two floors.

Do you need a permit for a small shed in Vancouver?

Vancouver doesn’t require a building permit for a shed under 10 m² (108 sq/ft) that doesn’t create a hazard, but zoning still applies. On a high-rise, check with the strata as well. See Vancouver Shed Regulations.

More outbuildings to explore

Browse more Backyard Outbuildings, read the Vancouver Shed Regulations, or check the Maximum Shed Size Without a Permit guide.