Site icon Outbuildings.ca

14’x22′ Temporary Tattoo Booth at the PNE

About this building

This 14×22 modular booth was made for a temporary-tattoo concession at the Pacific National Exhibition (PNE) in Vancouver. At 14′ x 22′ (308 sq/ft), it’s a factory-built, CSA A277 building with a black finish, a 14-foot roll-up service door, recessed soffit lights and a wood access deck and ramp. Bold tattoo-flash artwork on the side wall makes it a standout on the midway. The photos follow the build from the shop to the fairground.

Built in the shop

The booth was built in a shop as a factory-built unit. The walls were framed, wrapped and sheathed with fibre cement sheets, and the wide opening for the roll-up door was framed in.

Inside the booth

Inside, the walls and ceiling are finished drywall, with recessed ceiling lights and a vinyl plank floor. The roll-up door fills one end, so the service opening can be fully closed and locked at night.

Delivered to the fairground

The finished booth travelled on a gooseneck trailer behind a pickup truck. An oversize load sign went on the back, and the crew brought the booth through the midway to its spot.

The finished Temporary Tattoo Booth

On site, the booth has a wood deck and ramp, recessed lights under the soffit and large artwork on its side wall. The roll-up door opens to a counter-style service opening.

SPECIFICATIONS:
LocationPacific National Exhibition (PNE), Vancouver, British Columbia
Size14′ x 22′ (308 sq/ft)
TypeModular, CSA A277 factory-built building
OverhangsFront 24″; sides 12″
SidingHardie sheets, finished black
RoofStanding seam Galvalume
InsideDrywall walls and ceiling; vinyl plank floor
Doors36″ steel door and a 14′ roll-up garage door
WindowsNone
DeckWood deck with access ramp
Power and heatYes
CustomizationThe whole building, including the artwork

More photos

The photos below show the artwork, the soffit and the front of the booth up close.

What to plan before ordering a concession booth

A booth for a fair or festival has to move easily and open quickly, so a few early choices matter.

Frequently asked questions

How big is this booth?

It’s 14 feet by 22 feet, which is 308 sq/ft (about 28.6 m²).

What does CSA A277 mean?

CSA A277 is the Canadian standard for factory-built buildings. It means the booth was built and inspected in a factory setting.

How does the service door work?

The booth has a 14-foot roll-up garage door at the front. It rolls up to open the whole front for service.

Does it have power and heat?

Yes. The booth has electrical power and heat, and finished drywall inside.

More outbuildings to explore

Browse more Backyard Outbuildings, read Maximum Shed Size Without a Permit, or check the Shed Rules by City.

Exit mobile version