About this studio
This 10′ x 12′ backyard studio was built as a quiet place to work from home in the District of North Vancouver. The owner wanted it in the far south-west corner of the lot, almost 112 feet from the front curb. To get it there, the finished studio was lifted over the house by a 200-ton mobile crane.
A quiet studio for working from home
Tall windows and a full-glass door fill the front of the studio with light, and clerestory windows run under the roof. The roof reaches 24 inches past the walls on the front and sides, which shades the glass and keeps rain off the door. Grey lap siding covers the front and sides, and the end wall is corrugated Galvalume steel.
Inside, the ceiling is pine tongue-and-groove, the walls are drywall and the floor is vinyl plank. The studio has power and heat, so it works year-round.
Built in a factory, lifted in by crane
The studio was built indoors in a factory to the CSA A277 standard for factory-built buildings. Building off site means crews don’t need to come and go from the yard for weeks, and the work isn’t held up by rain.
Because the studio was going so far from the street, it couldn’t be wheeled in. It was trucked to the site on a trailer, and a 200-ton mobile crane with a reach of over 200 feet lifted it over the house and into the backyard.
| Size | 10′ x 12′ (120 sq/ft) |
|---|---|
| Design | Modern backyard studio with a single-slope shed roof |
| Build type | Factory-built modular (CSA A277) |
| Siding | Hardie lap siding + corrugated Galvalume |
| Roof | Standing seam Galvalume |
| Overhangs | Front 24″; sides 24″ |
| Windows | Vinyl, with clerestory windows |
| Doors | 36″ full-glass fiberglass door |
| Interior | Pine tongue-and-groove ceiling, drywall walls, vinyl plank floor |
| Power and heat | Yes |
| Location | District of North Vancouver, BC |
More photos
The photos below show the finished studio and more of the crane lift.
What to plan before building a backyard studio
A studio like this one starts with a few simple choices. Getting them right early saves money and avoids problems with the city later.
- Size: 10′ x 12′ (120 sq/ft) fits a desk, editing gear and shelving. It’s over 10 m² (about 108 sq/ft), so in the District of North Vancouver it needs a building permit.
- Access: a lot with no side access may need a crane to lift the building over the house. Plan the crane, the street space and the lift path early.
- Light: tall windows, a glass door and clerestory windows give good daylight for work.
- Power and heat: plan the electrical early if the studio will be used year-round.
Frequently asked questions
How big is this backyard studio?
It’s 10 feet by 12 feet, which is 120 sq/ft (about 11.1 m²) of floor space.
Do you need a permit for a backyard studio in the District of North Vancouver?
Yes. The District of North Vancouver requires a building permit for an accessory building over 10 m² (108 sq/ft), so a studio this size needs one. The District also says a building used as a studio is no longer treated as a shed. Power and plumbing can mean extra permits. See North Vancouver Shed Regulations (District) for the details.
How do you get a studio into a backyard with no access?
A factory-built studio can be lifted over the house by crane. For this one, a 200-ton mobile crane lifted it about 112 feet from the front curb to the back corner of the lot.
Can a studio like this be built in a different size or style?
Yes. The size, siding, roof, windows and doors can all be changed. Check the Maximum Shed Size Without a Permit guide before picking a size.
More outbuildings to explore
Browse more Backyard Outbuildings, see the North Vancouver Backyard Office, or check the Shed Rules by City.
